Flight Simulator X Keyboard Commands
The complete list of Keyboard Commands for Flight Simulator X
NOTE: Make sure Num Lock is OFF before using Num Pad commands.
SIMULATOR COMMANDS
Pause
|
P or BREAK
|
Full Screen Mode
|
ALT + ENTER
|
Menus (display/hide)
|
ALT
|
ATC Menu (display/hide)
|
ACCENT or SCROLL LOCK
|
Kneeboard (display/hide)
|
SHIFT+F10
|
Sound (on/off)
|
Q
|
Reset Current Flight
|
CTRL+; (SEMICOLON)
|
Save Flight
|
; (SEMICOLON)
|
Exit Flight Simulator
|
CTRL+C
|
Exit Flight Simulator Immediately
|
CTRL+BREAK
|
Joystick (on/off)
|
CTRL+K
|
Cycle Coordinates/Frame Rate
|
SHIFT+Z
|
Select Item 1
|
1
|
Select Item 2
|
2
|
Select Item 3
|
3
|
Select Item 4
|
4
|
Select Time Compression
|
R
|
Drop Objects
|
SHIFT+D
|
Fuel Truck (request)
|
SHIFT+F
|
Aircraft Labels (display/hide)
|
CTRL+SHIFT+L
|
Flying Tips (display/hide)
|
CTRL+SHIFT+X
|
Increase Selection
|
= (EQUAL SIGN)
|
Increase Selection Slightly
|
SHIFT+= (EQUAL SIGN)
|
Decrease Selection Slightly
|
SHIFT+- (MINUS SIGN)
|
Decrease Selection
|
- (MINUS SIGN)
|
Capture Screenshot
|
V
|
Jetway (attach/detach)
|
CTRL+J
|
End Flight
|
ESC
|
CONTROL SURFACE COMMANDS
Ailerons (bank left) | Num Pad 4 |
Ailerons (bank right) | Num Pad 6 |
Aileron Trim (left) | CTRL+Num Pad 4 |
Aileron Trim (right) | CTRL+Num Pad 6 |
Rudder (yaw left) | Num Pad 0 |
Rudder (yaw right) | Num Pad ENTER |
Rudder Trim (left) | CTRL+ Num Pad 0 |
Rudder Trim (right) | CTRL+Num Pad ENTER |
Center Ailerons and Rudder | Num Pad 5 |
Pitch Down (elevator) | Num Pad 8 |
Pitch Up (elevator) | Num Pad 2 |
Elevator Trim Down | Num Pad 7 |
Elevator Trim Up | Num Pad 1 |
Flaps (retract fully) | F5 |
Flaps (retract incrementally) | F6 |
Flaps (extend incrementally) | F7 |
Flaps (extend fully) | F8 |
Extend/Retract Spoilers/Airbrakes | / (FORWARD SLASH) |
Arm Spoilers | SHIFT+/ (FORWARD SLASH) |
Water Rudder Up/Down | CTRL+W |
ENGINE COMMANDS
On multiengine aircraft, engine commands affect all engines unless you first select an engine. | |
Select Engine
|
E+engine number (1-4)
|
Select All Engines
|
E+1+2+3+4
|
Engine Autostart
|
CTRL+E
|
Throttle (cut)
|
F1
|
Reverse Thrust (turboprops/jets)
|
F2 (press and hold)
|
Throttle (decrease)
|
F2 or Num Pad 3
|
Throttle (increase)
|
F3 or Num Pad 9
|
Throttle (full)
|
F4
|
Propeller (low RPM)
|
CTRL+F1
|
Propeller (decrease RPM)
|
CTRL+F2
|
Propeller (increase RPM)
|
CTRL+F3
|
Propeller (high RPM)
|
CTRL+F4
|
Mixture (idle cutoff)
|
CTRL+SHIFT+F1
|
Mixture (lean quickly)
|
CTRL+SHIFT+F2
|
Mixture (enrich)
|
CTRL+SHIFT+F3
|
Mixture (full rich)
|
CTRL+SHIFT+F4
|
Carb Heat/Engine Anti-ice ((on/off))
|
H
|
Magnetos (select)
|
M
|
Master Battery/Alternator (select)
|
SHIFT+M
|
Jet Starter (select)
|
J
|
Helicopter Rotor Clutch ((on/off)) | SHIFT+. (PERIOD) |
Helicopter Rotor Governor ((on/off)) | SHIFT+, (COMMA) |
Helicopter Rotor Brake ((on/off)) | SHIFT+B |
Increase Selection
|
= (EQUAL SIGN)
|
Increase Selection Slightly
|
SHIFT+= (EQUAL SIGN)
|
Decrease Selection Slightly
|
SHIFT+- (MINUS SIGN)
|
Decrease Selection
|
- (MINUS SIGN)
|
GENERAL AIRCRAFT COMMANDS
Brake (set parking)
|
CTRL+. (PERIOD)
|
Pushback (start/stop)
|
SHIFT+P (then press 1 or 2 to turn tail right/left) |
Brakes (apply/release)
|
. (PERIOD)
|
Brakes (apply left brake)
|
Num Pad + (PLUS)
|
Brakes (apply right brake)
|
Num Pad - (MINUS)
|
Landing Gear (extend/retract)
|
G
|
Tail wheel (lock/unlock) | SHIFT+G |
Landing Gear (extend manually)
|
CTRL+G
|
Fuel Dump (on/off)
|
CTRL+SHIFT+D
|
Subpanels (display/hide)
|
SHIFT + 1 through 9
|
Smoke System ((on/off))
|
I
|
Cowl Flaps (open incrementally)
|
CTRL+SHIFT+V
|
Cowl Flaps (close incrementally)
|
CTRL+SHIFT+C
|
Tow Plane (call)
|
CTRL+SHIFT+Y
|
Tow Rope (release)
|
SHIFT+Y
|
Doors (select)
|
SHIFT+E
|
LIGHT COMMANDS
Lights - all (on/off)
|
L
|
Strobe Lights (on/off)
|
O
|
Panel Lights (on/off)
|
SHIFT+L
|
Landing Lights (on/off)
|
CTRL+L
|
Landing Light (tilt down)
|
CTRL+SHIFT+Num Pad 2
|
Landing Light (tilt left)
|
CTRL+SHIFT+Num Pad 4
|
Landing Light (tilt right)
|
CTRL+SHIFT+Num Pad 6
|
Landing Light (tilt up)
|
CTRL+SHIFT+Num Pad 8
|
Landing Light (center)
|
CTRL+SHIFT+Num Pad 5
|
RADIO COMMANDS
ATC Window (display/hide)
|
` ACCENT or SCROLL LOCK
|
VOR 1 Ident (on/off)
|
CTRL+1
|
VOR 2 Ident (on/off)
|
CTRL+2
|
MKR Ident (on/off)
|
CTRL+3
|
DME Ident (on/off)
|
CTRL+4
|
ADF Ident (on/off)
|
CTRL+5
|
Standby Frequency (swap)
|
X
|
COM Radio (select)
|
C
|
NAV Radio (select)
|
N
|
OBS indicator (select)
|
SHIFT+V
|
ADF (select)
|
CTRL+SHIFT+A
|
DME (select) | F |
Transponder (select)
|
T
|
Increase Selection
|
= (EQUAL SIGN)
|
Increase Selection Slightly
|
SHIFT+= (EQUAL SIGN)
|
Decrease Selection Slightly
|
SHIFT+- (MINUS SIGN)
|
Decrease Selection
|
- (MINUS SIGN)
|
AUTOPILOT COMMANDS
Master (on/off)
|
Z
|
Flight Director (on/off)
|
CTRL+F
|
Wing Leveler (on/off)
|
CTRL+V
|
Yaw Damper (on/off)
|
CTRL+D
|
Altitude Hold (on/off)
|
CTRL+ Z
|
Altitude Bug (select)
|
CTRL+SHIFT+Z
|
Heading Hold (on/off)
|
CTRL+H
|
Heading Bug (select)
|
CTRL+SHIFT+H
|
Airspeed Hold (on/off)
|
CTRL+R
|
Mach Hold (on/off)
|
CTRL+M
|
Autothrottle (arm)
|
SHIFT+R
|
Autothrottle engage (TOGA)
|
CTRL+SHIFT+G
|
Nav 1 Hold (on/off)
|
CTRL+N
|
Approach Mode (on/off)
|
CTRL+A
|
Back Course Mode (on/off)
|
CTRL+B
|
Localizer Hold (on/off)
|
CTRL+O
|
Attitude Hold (on/off)
|
CTRL+T
|
Increase Selection
|
= (EQUAL SIGN)
|
Increase Selection Slightly
|
SHIFT+= (EQUAL SIGN)
|
Decrease Selection Slightly
|
SHIFT+- (MINUS SIGN)
|
Decrease Selection
|
- (MINUS SIGN)
|
INSTRUMENT COMMANDS
Heading Indicator (reset)
|
D
|
Altimeter (reset)
|
B
|
Pitot Heat (on/off)
|
SHIFT+H
|
Increase Selection
|
= (EQUAL SIGN)
|
Increase Selection Slightly
|
SHIFT+= (EQUAL SIGN)
|
Decrease Selection Slightly
|
SHIFT+- (MINUS SIGN)
|
Decrease Selection
|
- (MINUS SIGN)
|
VIEW COMMANDS
2-D Cockpit (cycle panels)
|
W
|
Snap to Panel View
|
SHIFT+Num Pad 0
|
View (next category)
|
S
|
View (previous category)
|
SHIFT+S
|
View (next view in category)
|
A
|
View (previous view in category)
|
SHIFT+A
|
View (previous view toggle)
|
CTRL+S
|
View (default zoom)
|
BACKSPACE
|
Look (snap)
|
Num Pad
|
Look (pan)
|
Hat switch or thumbstick
|
Look (reset to forward view)
|
SHIFT+Num Pad DEL
|
Look Using Mouse (on)
|
Hold SPACEBAR
|
Look Using Mouse (on/off)
|
SHIFT+O
|
View (open new window)
|
[ (LEFT BRACKET)
|
View (close selected window)
|
] (RIGHT BRACKET)
|
View (open new top-down window)
|
SHIFT+] (RIGHT BRACKET)
|
Virtual Cockpit
|
F9
|
2-D Cockpit
|
F10
|
Locked Spot View
|
F11
|
Top-Down View
|
F12
|
2-D Panel Transparency
|
CTRL+SHIFT+T (+ or -)
|
Window (bring selected to front)
|
' (APOSTROPHE)
|
Zoom In
|
= (EQUAL SIGN)
|
Zoom Out
|
- (HYPHEN)
|
View (next window)
|
CTRL+TAB
|
View (previous window)
|
CTRL+SHIFT+TAB
|
Eyepoint (move back)
|
CTRL+ENTER
|
Eyepoint (move down)
|
SHIFT+BACKSPACE
|
Eyepoint (move forward)
|
CTRL+BACKSPACE
|
Eyepoint (move left)
|
CTRL+SHIFT+BACKSPACE
|
Eyepoint (move right)
|
CTRL+SHIFT+ENTER
|
Eyepoint (move up)
|
SHIFT+ENTER
|
Eyepoint (reset)
|
CTRL+SPACE
|
SLEW COMMANDS
Slew to rapidly reposition your aircraft without flying in real time. | |
Slew Mode (on/off)
|
Y
|
Heading North/Attitude Level
|
CTRL+SPACEBAR
|
Freeze All Movement
|
Num Pad 5
|
Slew Forward
|
Num Pad 8
|
Slew Backward
|
Num Pad 2
|
Slew Left
|
Num Pad 4
|
Slew Right
|
Num Pad 6
|
Slew Up Slowly
|
Q or F3
|
Slew Up Quickly
|
F4
|
Slew Down Slowly
|
A
|
Slew Down Quickly
|
F1
|
Freeze Vertical Movement
|
F2
|
Rotate Left
|
Num Pad 1
|
Rotate Right
|
Num Pad 3
|
Pitch Nose Up
|
9
|
Pitch Nose Up Quickly
|
F5
|
Pitch Nose Down
|
F7 or 0
|
Pitch Nose Down Quickly
|
F8
|
Freeze Pitch
|
F6
|
Bank Left
|
Num Pad 7
|
Bank Right
|
Num Pad 9
|
MISSION COMMANDS
Compass/Pointer (on/off) | U |
Compass Objective (next) | K |
Compass Objective (previous) | SHIFT+K |
MULTIPLAYER COMMANDS
Chat Window (display/hide) | CTRL+SHIFT+] |
Chat Window (make active) | ENTER |
Voice (start transmit) | CAPS LOCK |
Voice (stop transmit) | ^CAPS LOCK |
Voice (start transmit to all) | SHIFT+CAPS LOCK |
Voice (stop transmit to all) | ^SHIFT+CAPS LOCK |
Transfer/Accept Control | SHIFT+T |
Follow Other Player | CTRL+SHIFT+F |
To add or customize keyboard commands, on the Options menu, point to Controls,
then click Buttons/Keys. To learn more, see the Using the Keyboard article in the
Learning Center